There are several types of tube laser cutting machines on the market today, but which one is best for your needs? Listed below are some of the pros and cons of each machine. Read on to learn about their features, cost, and accuracy. Then decide which one is best for your project. You’ll be glad you did! Now, let’s move on to the cons! – Cost. If you don’t need to cut large pieces of metal, you can still get an affordable tube laser cutter.
Consider your budget and the types of material you will be cutting:
Laser tube cutting machines vary in price from a few thousand dollars to tens of thousands of dollars. When purchasing a machine, consider your budget and the types of materials you will be cutting. A less expensive machine may be sufficient for beginners, but higher-end machines are more reliable and capable of handling more work. Here are some features to look for in a tube laser cutting machine:
Manufacturers of tube laser cutting machines have been trying to make their machines more versatile and cost-effective, and one way to do this is to integrate advanced features from their higher-end counterparts into their lower-end machines. If you consider buying a laser cutting machine, you should look for its flexibility.
Make sure to consider its capability:
Before purchasing a tube laser cutting machine, consider its capabilities. While many tube lasers are equipped with a tilting torch, a fully-featured 3D torch will expand the range of applications it can handle. For example, a machine equipped with a 3D head will enable fabricators to cut pipe to any desired angle, which will improve weld prep and assembly fit-ups. The laser tube cutting machine should be able to handle a range of pipe sizes, ranging from six to hundreds of meters.
A servo motor drive on a tube laser cutting machine is an important feature that allows the cutting head to adjust its position and torque to the proper size for each specific type of tube. The servo motor helps the chuck control its position and torque while clamping the material to avoid deformation. The XA Series tube laser cutting machines have an Ether CAT bus control system that boosts response time by 6 times. The maximum cutting diameter and weight are higher than mainstream products on the market.